Vertical method flame retardant performance tester

GB5455 touch screen control textile Vertical method flame retardant performance tester is based on the original equipment technology upgrade products, using touch screen control, test a high degree of automation, in addition to the original rely on a variety of keys, appliances to achieve the automation function, touch screen control models can store previous test data, and Can be retrieved during the test previous data. The equipment is suitable for safety nets, protective clothing, safety belts and other types of fabrics and their products, applicable to the GB5455-2014 standard in the vertical direction textile bottom edge ignition when the burning performance test method.

Second, the design standard.

GB5455-2014 "textile burning performance vertical release Damage length, negative combustion and the determination of the renewal of combustion time

Applicable standards: GB6529

GB5725-2009 safety net

GB 8965.1-2009 Protective clothing Flame retardant protection Part 1: Flame retardant clothing

GB/T 6096-2009 Safety belt test method

GBT13489-2008 rubber coated fabric burning performance determination of vertical small flame test method

Third, the main technical parameters more specific price, parameters performance, after-sales inquiries 185.1349.888-.9

1. Touch screen display/control

2. The equipment is divided into two parts: the control part and the combustion box, the size of the combustion box is 330*330*765mm

3. The front part of the combustion box is tempered glass observation door

4. The top of the box is evenly distributed with 16 exhaust holes with an inner diameter of 12.5mm; the combustion box is distributed with 6 exhaust holes on each side with an inner diameter of 12.5mm

5. The top of the box is equipped with a top plate

6. The top of the box with a bracket can be hung sample clip, the bottom of the sample clip is located in the igniter orifice high point above 17mm

7. 11mm inner diameter of the igniter orifice, 25° angle between the pipe head and the vertical line. Ignition time: accurate to 0.05s

8. Gas source: Industrial grade C-completion, D-completion or mixed gas, and A-completion gas of not less than 97% purity is used if the specimen is pretreated in accordance with 7.3.

9. Specimen size: 300*89mm, five pieces each in the horizontal and vertical directions

10. Ambient temperature: -10℃～30℃

11. Power supply voltage and power: 220V ± 10% 50HZ power less than 100W

12. Bunsen burner applied flame time 0-99M99S, can be set arbitrarily, accuracy ± 0.01s

13. Afterflame, afterglow time :0-99M99S

14. Bunsen burner blue flame height: 15mm-175mm can be arbitrarily adjusted, with flame height scale

15. Bunsen burner automatic ignition, automatic timing, ignition time arbitrary setting (can be preset)

16. Touch screen related parameters.

a. Size: 7 inch Effective display size 15.5cm long by 8.6cm wide.

b. Resolution: 800*480

c. Communication interface RS232, 3.3V CMOS or TTL, serial mode

d. Storage capacity:1G

e. Using pure hardware FPGA drive display, "zero" start-up time, power on can run

f. M3+FPGA architecture, M3 is responsible for instruction parsing, FPGA focus on TFT display, good speed and reliability performance

g. The main controller adopts low energy consumption processor, which automatically enters energy-saving mode.


PS: (WLJCDM809)
web:https://www.qinsun-lab.com/354.html

More:
flame retardant,flame retardant fabric,flame retardant performance,flame retardant test,45° single core cable flame retardant performance testing equipment,wood-based flame retardant panels,flame retardant grommet edging,fabric flame retardant,flame retardant effect,flame retardant fabrics,green flame retardant,flame retardancy series 1,flame retardancy series 2,flame retardancy series 3 -part1,flame resistant, flame retardant fabrics finished product

Tag:
#flameretardantfabric #flameretardantperformance #flameretardant #flameretardanttest