FY-PWGZ200 Small Spray Dryer Stainless Steel Tower

Product description of stainless steel tower for small spray dryer:
FY-PWGZ200 This product is mainly used in universities, research institutes and laboratories of food, pharmaceutical and chemical enterprises to produce micro-particle powders. It has broad-spectrum applicability to all solutions such as emulsions and suspensions, and is suitable for drying of heat-sensitive substances such as Biological products, biological pesticides, enzyme preparations, etc., because the sprayed materials are only exposed to high temperature when they are sprayed into mist-like particles, so they are only heated instantly, which can keep these active materials from drying. .
Main features of stainless steel tower for small spray dryer:
1. It adopts large color touch screen operation, combines automatic control and manual control, ten-segment program temperature control, and has its own memory function:
2. Fully automatic control: one-button start-up, after setting the spray process parameters, the temperature reaches the predetermined temperature, the peristaltic pump starts automatically, the running animation is displayed on the touch screen, and the running process is clearly displayed;
3. Manual control: If you need to adjust the process parameters during the experiment, you can easily switch to the manual state, and the entire experiment process is dynamically displayed on the color touch screen (animation).
4. Shutdown protection function: just press the stop button when shutting down, the machine will stop running immediately except for the fan, and the heating part of the equipment will not be burned out due to misoperation (forcibly turning off the fan).
5. The machine has the function of misoperation protection. When the fan and heater switch are used in the wrong order, the machine will automatically remind to prevent the novice from misoperation and damage the machine.
6. Built-in oil-free air compressor, the particle size of the powder is normally distributed, the fluidity is good, and the noise is low, less than 60db, in line with the national laboratory noise standard;
7. The atomization structure of the two-fluid spray, the whole machine is made of stainless steel, the design is compact, no auxiliary equipment is required, it is convenient to use, and it will last as new.
8. In order to meet the requirements of users to adjust various parameters in the experimental range, the real-time PID constant temperature control technology is adopted in the design of drying temperature control, so that the temperature control in the whole temperature area is accurate, and the heating temperature control accuracy is ±1℃.
9. In order to keep the sample pure, it is equipped with an air inlet filter.
10. Time setting function: The user can set the working time of the machine by himself, without manual guarding. When the working time is over, the machine stops working without manual guarding, which greatly saves the precious time for customers to do experiments.
11. The whole machine is made of stainless steel, the atomization structure of the two-fluid spray, the spray, drying and collection system is made of transparent high borosilicate heat-resistant glass material
12. The feeding volume can be adjusted by the feeding peristaltic pump, and the sample volume can reach 50ml. Magnetic stirrer optional
13. The particle size of the finished dry powder after drying is relatively uniform, and more than 95% of the dry powder is in the same particle size range.
14. By adjusting the atomization state, different drying and collection of powders with different particle sizes can be achieved.
15. The small spray dryer is equipped with a nozzle cleaner (through needle) for viscous materials. When the nozzle is blocked, it will be automatically removed, and the frequency of the needle through can be automatically adjusted;
16. Innovative tower wall purging device, higher material recovery rate (optional).
17. The automatic cleaning function greatly enhances the recovery rate of dry samples (optional).
18. The automatic cleaning function of the drying tower eliminates the need for manual cleaning, which greatly saves the experiment time (optional).

PS: (WLJCDM809-W)
Qinsun Instruments Co., Ltd
web: https://www.qinsun-lab.com
email:market@qinsun-lab.com