Scope of application.
It can test the abrasion resistance and pilling performance of various plants. Under a certain pressure, the specimen and the specified abrasive are subjected to continuous commutation friction, and the degree of wear and puckering is evaluated in comparison with standard parameters. Touch screen control, equipped with a full-featured programmer, pre-programmable batch and total count, individually set the count for each test head; 4 speeds including standard speed can be selected.

Technical parameters.

1. Number of work stations : 9 positions;

2. Counting range: 0~999999 times

3. Maximum dynamic range: horizontal 60.5±0.5mm vertical 24±0.5mm

4. Pressurized object mass.

a.Gripper: 200±1g

b. Clothes specimen weight: 395±2g

c. Furniture decorative sample weight: 594±2g

d. Stainless steel butterfly: 260±1g

5. Effective friction diameter of the grinding block

A type 200g (1.96N) friction head (9KPa) ¢ 28.8-0.084mm

B type 155g (1.52N) friction head (12KPa) ￠ 90 -0.10mm

6. Gripper and grinding table relative movement speed: 20-70r / min (adjustable)

7. Loading sample pressure hammer mass: 2385 ± 10g

Instrument configuration and consumables.

1. 9 sets of sample clamps;

2.9Kpa, 12KPa weights each 9;

3.Φ38mm and Φ140mm sampler each set;

4. Φ38mm and Φ140mm sampler pad each;

5. One set of puckering test set;

6. One set of SM50 standard sample;

7.EMPA standard puckering sample and SM-25 standard abrasive cloth 1.6m×5m piece;

8. Standard foam 1.5m×0.5m set (4 pieces/set);

9. Standard felt piece a piece;

10.Φ90mm felt disc 20 pieces;

11. 50 pieces of Φ38mm and Φ140mm sampler blades each;

12. Other necessary accessories recommended by the manufacturer.